- Detectomat Fire Alarm System
- Detnov Fire Alarm System
- AP Sensing Fiber Optic Fire Detection System
- XTRALIS OSID Open Area Smoke Detection Detector
- Xtralis Vesda Active Air Draft
- Talentum Flame Detectors
- Extinguishing Control Panels
- Thermo Cable, Cable Type Sensor
- Smoke Evacuation and Extinguishing
- Honeywell Fire Alarm System
• Voice and Emergency Announcement
• Smoke Control and Evacuation
• Gas Detection and Alarm Systems
• Automatic Fire Extinguishing Systems
• IP CCTV and Video Control
• Access Control and Security
• Building Automation and Management
• Lightning Automation
• Energy Management System
World leading linear detection
Thermocable is a world leading manufacturer of UK-based cable-based detection and detection technologies. For over 50 years, it compromises technological innovations shaped by an intuitive approach to emerging markets as a result of devoted work and attention to detail.
All technological product layers of Thermocable are designed for significant end-user benefits, including the protection of life and assets, as well as significant cost and time savings potential.
ProReact - Provides Linear Heat Sensing solutions for temperature sensitive environments where early detection of an abnormal temperature change is crucial.
Detection Temperatures
- 68°C (155°F)
- 78°C (172°F)
- 88°C (190°F)
- 105°C (221°F)
- 185°C (365°F)
Usage areas.
- Energy Production Facilities
- Oil and Gas Industry
- Mines
- Cold Storage
- Tank Fields
- Subway and Tunnels
- Cable Channels
- Storage Facilities
- Conveyors
- Escalators
Cable type temperature detectors can work with 2 different application types.
Cable type sensors can be connected to the interface exchange. Integration to the fire system can also be made via the interface switchboard. In long distance sensor applications, monitoring and control over the interface switchboard is the most preferred solution for easy detection of the fire place.
Cable type sensor can be directly connected to the fire alarm system via the address and zone module. (Without using an interface switchboard) It is the preferred solution for short range sensor applications.
Linear Temperature Detection System Digital Interface Module
Usage areas.
- 2x1000 meters sensor cable capacity
- Advanced functionality for traditional Digital LHD systems
- Detects the exact location of an incident and responds immediately
- Simultaneous monitoring of up to two zones, spot alarm detection in feet and meters
- Alarm and fault indication for each zone
- Dry contact relay outputs for fault and alarm corresponding to each zone
- Software integration with RS485 Modbus RTU output, scada and other systems
- Built-in siren for audible warning
- Lockout / Chance Detection requires both LHD wires to be triggered before transmitting an alarm, eliminating the possibility of false alarms
- Low installation and maintenance costs reduce the total cost
- UL864 approved
- UL, CE, RoHS end user specifications
ProReact Digital Interface Monitoring Module, which belongs to Thermocable's world-leading digital linear heat detection technologies family, works with ProReact Digital Linear Heat Detection Cable and is designed to perform effective monitoring up to two zones with a cable capacity of 2x1000 meters.
The Digital Interface Monitoring Module is certified to UL864 10th edition standard, the latest revision of the UL standard for fire alarm control panels and accessories.
The Digital Interface Monitoring Module simultaneously monitors two zones of the Digital LHD cable for an alarm or fault condition. If an overheating or fire condition triggers any zone of the Digital LHD cable, the Module automatically calculates and displays the distance along the cable in feet and meters to the alarm point. To eliminate the possibility of false alarms, the two zones can operate independently of each other or in lockout / collision detection mode.
The Digital Interface Monitoring Module has one RS-485 Modbus RTU output. In this way, direct connection to SCADA or other systems via Modbus is possible.
The integrity of the system is supervised at more than one level. All malfunction events such as Linear Heat Detection cable breakage, ground fault in lines, power failure of the module or microprocessor failure are monitored and can be transferred to the fire system or scada as output.
BACK
UP